Welcome to the bigboi Knowledge Base
Your Source for Expert Advice, Troubleshooting, and Product Information
4
19
- BlowR Hose Reel
- BlowR PRO+ Manual
- SuckR PRO+ Manual
- BlowR ChargD Manual
- BlowR Hose Reel Manual
- SuckR MINI Manual
- BlowR PRO Manual
- D-IonizR 1 Manual
- D-IonizR 2 Manual
- BlowR Buddi JNR Manual
- BlowR Buddi Manual
- BlowR Mini Manual
- BlowR Mini+ Manual
- ExtractR Mini Manual
- SuckR PRO Manual
- WashR DUO Manual
- WashR FLO Manual
- WashR PRO Manual
- BlowR Buddi JNR
93
8
24
Troubleshooting
- The WashR PRO pump is running but does not reach the working pressure
- The WashR PRO Pressure fluctuates
- The WashR PRO pressure drops during use
- The WashR PRO pump is noisy
- There is the presence of water in oil on the WashR PRO
- The WashR PRO is experiencing a water leak
- The WashR PRO has a oil leak
- The WashR PRO motor does not start when switched on
- The WashR PRO When I switch on the unit, the motor hums but does not run
- Wash PRO TSS Version only. The motor starts even with gun trigger is released
- WashR PRO TSS Version only. No water delivery when gun trigger is depressed
- The WashR FLO Motor refuses to start
- WashR FLO motor stops
- WashR FLO | Motor starts up but there is no working pressure
- WashR FLO | Does not reach high enough pressure
- WashR FLO | Output pressure varies high and low
- WashR FLO | No detergent present
- WashR FLO | Spray wand is leaking
- WashR FLO pump is very noisy
- WashR FLO | Water is leaking from the pump
- WashR PRO | The pump is running but does not reach the working pressure
- WashR PRO | The pressure fluctuates
- WashR PRO | The pressure drops during use
- WashR PRO | The pump is noisy
- WashR PRO | There is the presence of water in the oil
- WashR PRO | Is experiencing a water leak
- WashR PRO | The unit has an oil leak
- WashR PRO | The motor does not start when switched on
- WashR PRO | When I switch on the unit, the motor hums but does not run
- WashR PRO | For the TSS Version only. The motor starts even with gun trigger is released
- WashR PRO | For the TSS Version only. No water delivery when gun trigger is depressed
- WashR FLO | Motor refuses to start
- WashR FLO | The motor stops
- WashR FLO | The pump is very noisy
- WashR PRO | Producing humming sound after turning on, and tripping the circuit breaker
- WashR PRO | Motor is still running even after releasing the trigger of the trigger gun
- WashR PRO | The current surged high while the WashR is starting up
- WashR PRO | Recommended wire gauge, AWG, if the unit will be connected to a power extension cord?
- WashR PRO | The male connector connected to the inlet port is leaking?
- WashR PRO | Producing very low pressure?